4 Inch Deep Pour Epoxy Resin Kit – Crystal Clear Casting Resin for River Tables, Countertops & Thick Mold Crafts

4 Inch Deep Pour Epoxy Resin: Industrial Grade for High-Yield Production

When your workshop budget and delivery timelines are on the line, you cannot afford a deep pour that cracks, overheats, or turns cloudy. That is exactly why we engineered this slow-cure, low-viscosity casting system. It is built for volume: massive river tables, structural architectural castings, and thick-slab encapsulations.

You can pull off a full 4-inch (100mm) single-stage pour without watching the thermostat. No thermal runaways, no wasted material. Just a clean, steady cure that maximizes shop-floor efficiency and minimizes expensive workshop scrap.

What this means for your production line:

• Zero-Cloud Crystal Transparency: You get raw optical clarity with serious visual depth. Perfect for high-end contract furniture where buyers inspect the cross-sections under harsh showroom lighting.

• Compliant & Clean (BPA & VOC Free): This is a 100% solids formulation. It doesn’t off-gas, it doesn’t smell up the facility, and it contains zero VOCs. Fully cured surfaces meet standard compliance for incidental food contact, opening doors for commercial countertops and restaurant fit-outs.

• Self-Deairing Workflow: The formulation works for you. Its low-viscosity behavior lets trapped air escape naturally before the gel stage hits. Whether your team manually stirs in mica powders or uses mechanical mixers for colorants, the distribution stays uniform without micro-bubbles.

• Flexible Shop Integration: We supply this system in both 2:1 and 3:1 volumetric setups. It drops straight into your existing shop protocols, whether you dispense by hand or use automated metering pumps.

• Weatherproof Hardness: We baked in premium UV blockers and cross-linking agents. The result? A finished surface that fights off scratches and yellowing. More importantly for commercial builders: it won’t sweat, blush, or fog up when your shipping container hits high-humidity transit routes.

📋 What It’s Best For

• Studio & Crafting: Makes gorgeous serving trays, resin crafts, or layered ocean scenes. Perfect for locking down dried flowers, insects, and precious keepsakes in deep casts or pyramid molds.

• Heavy Woodworking: Specifically cooked up for deep-pour jobs. If you are building river tables, filling gaps in raw wood, or coating live-edge slabs, this is your go-to.

🛠️ How to Use It

• 1. The Mix

  Pour 2 parts Resin (A) to 1 part Hardener (B). Measure by volume, not weight.

• 2. Stirring

  Take your time. Stir slowly so you don’t whip up extra air. Keep scraping the walls and the bottom of your cup. If you miss a spot, the resin won’t cure right, leaving you with annoying soft patches. Stop when the cloudy streaks completely disappear.

• 3. Rest & Pour

  Let the cup sit for 5 minutes. You’ll see the bubbles rise and pop on their own. After that, go ahead and pour the clear liquid into your mold or over your piece.

• 4. Curing

  Leave it alone for 24 hours before trying to pull it out of the mold. It takes a full 72 hours to reach total, rock-hard strength.

🛠️ Quick Tips:

• Want color? Blend in your pigments or tints right before you pour (just after the 5-minute rest).

• Bubble trouble? Sweep a heat gun or torch lightly over the surface to zap any stubborn bubbles.

⚠️ Things to Keep in Mind

• Skip the Tumblers: This formula isn’t meant for tumbler cups or super-thin spin coatings.

• Protect Your Space: Once this stuff gets into fabrics, rugs, or clothes, it’s not coming out. Do your pouring in a garage or workshop, far away from carpeted rooms.

• Clean-up: If you spill any wet resin, clean it up fast using rubbing alcohol, acetone, or mineral spirits.

• Expiration: Keep the bottles tightly sealed. For the best results, use them within 1 year.